The MT11 probe sensor detects temperature changes in refrigerated environments to proactively identify equipment issues and prevent the loss of perishable goods.
Refrigeration is a critical process to prevent spoilage and ensure compliance along the entire cold chain. Issues with refrigeration equipment can lead to wasted inventory, spread of food-borne illness, and costly downtime.
IoT sensors provide insight into environmental conditions where visibility is traditionally lacking. The Cisco Meraki MT11, part of the Meraki MT sensor portfolio, provides real-time temperature data of refrigeration assets to protect business-critical equipment and sensitive inventory.
The Meraki MT11 reduces the complexity of traditional sensors by eliminating the need for dedicated gateways or management software. MT sensors automatically connect to Meraki MR access points and MV smart cameras as gateways, speeding up deployment time. MT sensors are fully cloud-managed and powered by the Meraki platform, providing single pane of glass visibility with all networked devices. Real-time visibility and configurable alerts keep you up-to-date wherever you are.
Once installed, MT11 will monitor conditions inside your refrigeration assets. If the compressor on your freezer fails, affecting the temperature of perishable goods inside, MT is watching. Customized alerts empower businesses to take action the moment an issue occurs to prevent costly downtime, inventory loss, or regulatory issues.
| Temperature probe sensors | |
| Bare Metal Temperature Probe | Cable length: 10 ft Range: -40°C to +55°C (-40°F to +131°F) Accuracy: -40°C to -30°C = +/- 2°C -30°C to -10°C = +/- 1°C -10°C to +55°C = +/- 0.5°C |
| Glycol-Encased Temperature Probe | Cable length: 10 ft Range: -40°C to +55°C (-40°F to +131°F) Accuracy: -40°C to -30°C = +/- 2°C -30°C to -10°C = +/- 1°C -10°C to +55°C = +/- 0.5°C |
| Wireless capabilities | |
| Bluetooth Low Energy | Compatible with MV smart cameras and MR access points |
| Operating frequency | 2.400–2.4835 GHz |
| IEEE standard | 802.15.1 (Bluetooth 4.2 Low Energy BLE) |
| Data logging | |
| Data sampling | Sample polling every two minutes Data reporting to gateway every 20 minutes, or immediately upon threshold violation |
| Onboard data storage | 4,000 data points (5 days of data at the default sampling rate) |
| BLE messages encrypted and authenticated using Cisco Trust Anchor technology | |
| Power | |
| Two AA batteries or power adapter | |
| Battery life up to five (5) years | |
| Power ratings: 5V; 0.2A | |
| Physical characteristics | |
| Dimensions: 117.1mm X 65.9mm x 26.0mm (length x width x height) | |
| Battery compartment | |
| Multicolor, multifunction status LED | |
| General purpose button | |
| Reset button | |
| USB-C Port | |
| Sensor connection plug (receptacle connector) | |
| MT11 operating environment | |
| Temperature: -18°C to +55°C (0°F to +131°F) | |
| Relative humidity: 0-95% | |
| Warranty | |
| Three-year hardware warranty with advanced replacement | |
| In the box | |
| MT11-HW | |
| Quick-start and installation guide | |
| 2x AA batteries (preinstalled) | |
| Mounting equipment | Wall mount backplate Magnet VHB tape 2 drywall anchors 2 mounting screws 8 cable clips (included with sensor probe) Mounting gasket (included with sensor probe) |
Bluetooth® Low Energy (LE) messages encrypted and authenticated using Cisco Trust Anchor technology
Note: Each Meraki MT sensor requires a license to operate. MA-CBL-TEMP-ME-1 and MA-CBL-TEMP-GL-1 are sold separately but at least one is required for operation.
Download the Cisco Meraki MT11 Sensor Datasheet (PDF).
Pricing Notes: