Overview:
The Catalyst 9300X-M addresses the most demanding enterprise applications by combining the simplicity of the Meraki dashboard with powerful switching hardware. To satisfy high-bandwidth applications and the deployment of high-speed 802.11ax/wifi-6 access points, the Catalyst 9300X-M provides multigigabit ports, 1TB stacking, and modular 10/25 or 40/100G uplinks. The Catalyst 9300X-M delivers resiliency with fast stack convergence and StackPower. The Catalyst 9300X-M provides Adaptive Policy using an over-the-wire tag which segments traffic into security groups to deliver scalable security. The Catalyst 9300X-M is integrated under the Meraki dashboard to provide a simply powerful solution to the most demanding wired access applications.
Adaptive Policy provides simple & scalable security policies to segment traffic using Security Groups. Security Groups are created in the dashboard using natural language such as “IOT device” & “Guest.” The security policy intent (e.g., Permit or Deny) is then simply provisioned between Security Groups which results in the segmentation of each group’s traffic. By making security policy management intuitive and scalable relative to legacy IP-address based Access Control Lists, Adaptive Policy empowers operators to confidently secure their network traffic independent of future network changes.
By pooling & distributing power across C9300X-Ms using a series of StackPower cables, StackPower provides simple and resilient power distribution across the stack.
A Catalyst 9300X switch can also be migrated to a Meraki-managed persona, where it would function as its Catalyst Meraki 9300X equivalent. For details on the migration process, please refer to our Getting started: Cisco Catalyst 9300 with Meraki Dashboard guide.
Features
| Category |
Features |
| Description |
48-port mGig UPoE+ switch |
| Highlights |
- Layer-3
- 40G/100G or 10G/25G modular uplink options on all models
- mGig support
- 1T/480G Dual Dedicated Hardware Stacking Ports
- 90W UPoE+ Support (802.3bt)
- StackPower in a ring topology supporting upto 4 switches
|
| Management |
- Managed via Cisco Meraki Dashboard
- Zero-touch remote provisioning (no staging needed)
- Basic configuration capability via local management page
- Detailed historical per-port and per-client usage statistics
- Operating System, device, and hostname fingerprinting
- Automatic firmware upgrades with scheduling control
- SNMP and SYSLOG support for integration with other network management solutions*
|
| Remote Diagnostics |
- Email, SMS and Mobile push notification alerts1
- Ping, traceroute, cable testing, and link failure detection with alerting
- Remote packet capture
- Dynamic and interactive network discovery and topology
- Combined event and configuration change logs with instant search
|
| Stacking |
- Physically stack up to 8 switches with 1Tbps of stacking bandwidth on all models (backward compatible with 480G)
- Virtual stacking supports thousands of switch ports in a single logical stack for unified management, monitoring, and configuration
- Faster convergence
- StackPower in a ring topology supporting upto 4 switches
|
| Ethernet Switching Capabilities |
- 802.1p Quality of Service, 8 queues (w/ 6 configurable for DSCP-to-CoS mapping)
- 802.1Q VLAN and trunking support for up to 4,094 VLANs (1000 active VLANs with STP enabled)
- Single Instance of 802.1s Multiple Spanning Tree Protocol (interoperable with RSTP, STP, PVST, RPVST)
- STP Enhancements: BPDU guard, Root guard, Loop guard, UDLD
- Broadcast storm control
- 802.1ab Link Layer Discovery Protocol (LLDP) and Cisco Discovery Protocol (CDP)
- 802.3ad Link aggregation with up to 8 ports per aggregate, multi-chassis aggregates supported on stacked switches
- Port mirroring
- IGMP snooping for multicast filtering
- MAC Forwarding Entries: 32K
|
| Layer 3 |
- Static routing, OSPFv2
- Multicast routing (PIM-ASM)
- Warm Spare (VRRP) *
- DHCP Server, DHCP Relay
|
| Security |
- Integrated multi-factor authentication for Dashboard management
- Role-based access control (RBAC) with granular device and configuration control
- Corporate wide password policy enforcement
- IEEE 802.1X RADIUS and MAB, hybrid authentication and RADIUS server testing
- Single-Host/Multi-Domain/Multi-Host/Multi Authentication
- Port security: Sticky MAC, MAC whitelisting *
- DHCP snooping, detection and blocking, Dynamic ARP Inspection
- IPv4 and IPv6 ACLs
- Secure Connect *
- Adaptive Policy
|
Note: * Available in a future software release
C9300X-48HX-M specifications:
| Interfaces |
48 x mGig UPoE+ RJ45 |
| Uplink (SFP+, SFP28, QSFP+, QSFP28) |
Modular |
| 1T/480G Hardware Stack Ports |
2 |
| Dedicated Management Interface |
1 |
| PoE/ UPoE Capabilities |
UPoE+ |
Dimensions (h x w x d) W/ Default Power Supply |
1.73 x 17.5 x22.03 in (4.4 x 44.5 x 55.9cm) |
| Weight |
14.6 lb (6.62 kg) |
| Mount Type |
1U Rack Mount |
| Hot Swap Fans |
Yes, 3x |
| Operating Temperature |
-5°C to 45°C |
| Humidity |
5 to 90% |
| Switching Capacity |
2000 Gbps |
| Stacking Bandwidth |
1 Tbps / 480 Gbps |
| Forwarding rate |
1488 Mpps |
| Default Power Supply |
PWR-C1-1100WAC-P-M |
| Hot Swap Power Supply |
Yes, Dual |
| Available PoE W/ Primary PS |
590W |
| Available PoE W/ Secondary PS** |
1690W |
| Power Load (idle/max) |
178.9 / 672 W |
| Electromagnetic Compatibility |
FCC Part 15 (CFR 47) Class A, ICES-003 Class A, CISPR22 Class A, CNS13438, EN 300 386 V1.6.1, EN 55022 Class A, EN 61000-3-2, EN61000-3-3, KN 32, TCVN 7189 Class A, EN 55032 , CISPR 32 Class A, V-2/2015.04, V-3/2015.04, VCCI-CISPR 32 Class A, CISPR24, EN 300 386 V1.6.1, EN 55024, KN35, TCVN 7317 |
| Safety |
CAN/CSA-C22.2 No. 60950-1, UL 60950-1, EN 60950-1, IEC 60950-1, AS/NZS 60950.1 |
| Environmental |
Reduction of Hazardous Substances (RoHS) |
| Warranty |
Full lifetime hardware warranty with next-day advanced replacement included |
| MTBF at 25°C |
185,420 |
| Whats In the Box |
In addition to the MS switch, each shipment includes the following.
- 1 x default power supply unit for the switch model (please refer to the power supply and specifications section)
- Rack mount brackets and screw kit
- 3 x Pre-installed fans.
|
Note: ** The PoE values are provided considering the secondary PS to be the default power supply of the respective model.